Steel cutting machine circular hole saw blade installation method details
When the saw blade is rotated for a certain distance, you can use four dull plates to fix the saw blade, and then flip the saw blade.
I. Uncovering the saw blade
1. loosen the unveiling saw blade of the steel cutting machine;
2. take out the circular hole saw blade;
3. Hold the hole in the center of the saw blade open with your hand;
4. Press the saw blade into the hole of the saw blade.
II, fix the saw blade
1. After the saw blade is put into position, turn the saw blade by hand to re-fix it to the original position;
2. When the saw blade is rotated for a certain distance, you can use four dull plates to fix the saw blade, and then flip the saw blade.
III. Adjusting the saw blade
1. After the saw blade is installed, you need to adjust the speed of the saw blade according to the material of the steel. 2;
2. After adjusting the saw blade, test whether the work is normal;
3. After starting normal use, you need to check the wear degree of the saw blade frequently.
IV. Precautions
1. the installation process should be carefully operated, collision, fall and other situations will cause damage to the saw blade;
2. you need to pay attention to the wear and tear of the saw blade in the process of use and replace it in time.
ZHIGUANG
PRECISION TOOLS
Contact Us
Add: No.18 Sangzi South Road, Zhouwangmiao Town, Haining, Jiaxing, Zhejiang, China
Tel: +86-573-87939661 / +86-573-87939663
Fax: +86-573-87939600
E-mail: info@hzzgjy.com
Do you have any questions? We’ll get back to you.